How to Clean the S-Shaped Plastic Screw for the V Max Pen Hefue Beauty

How to Clean the S-Shaped Plastic Screw for the V Max Pen Hefue Beauty

The S-shaped plastic one step tightening mechanism for v max pen if beauty can be adjusted by sliding the grip up or down to provide a perfect fit for your particular hand.v max pen hifu beauty If you are not confident with this process, you can also do it the easy way which is by unscrewing the screw. You will need to remove the plastic mouth from the screw and then slide the screw to the side of the lip of the mouth and unthread it.

A bolt should come out, depending on the kind of screw you have removed.v max pen hifu beauty v max pen hifu beauty It should be replaced with a new one. Once the screw is unscrewed, you can now put the screw back into the screws, usually into the lip of the screw.

Remove the quick release spring and the hifu beauty to open the v max pen hifu. If there is a tiny sticker on the inner part of the lips, turn it away using a screwdriver to remove it. You can now pull out the plastic mouth from the plastic spring. It is also helpful to hold the plastic mouth near the sticker to avoid it from popping out.

If the sticker is not removable, you can use a screwdriver to unscrew it from the screw. Once the sticker is removed, you can now replace the spring with the screw to tighten the screws. Once you have reinstalled the spring, the lipstick can be put in the lip of the screw. You should also put the screws back into the screw lips to prevent them from getting pulled out.

At this point, the v max pen hifu is now ready to be used. You may now take a dry pencil and try writing your name onto the lipstick. The lightness of the pencil is enough to keep the pencil in place. Then, replace the lip of the screw with the new one.

Make sure to wipe the lip of the screw using a paper towel. This is to make sure that the lipstick does not leak out and ruin the inner part of the screw. The v max pen hifu is now done. Now you can enjoy your lovely lipstick as you write your name.

You should check the screw after using the lipstick. If it still has ink, you should wash it with water. If the screw still has not absorbed the ink, the screw may still be old and can no longer be used. However, you should not worry since a new screw will be sent to you as soon as possible.

There are a lot of tips you can do in order to clean the v max pen hifu. Hopefully, this article has helped you to have an easier time cleaning the hifu beauty.

Tags:3d hifu | 4 in 1 v max hifu | dr pen | dr pen microneedling pen